• 1 Cutter. 1 Sand Belt. 1 Sand Wheel, Shape & Sand
  • 1 Cutter. 1 Sand Belt. 1 Sand Wheel, Shape & Sand
  • 1 Cutter. 1 Sand Belt. 1 Sand Wheel, Shape & Sand
  • 1 Cutter. 1 Sand Belt. 1 Sand Wheel, Shape & Sand

1 Cutter. 1 Sand Belt. 1 Sand Wheel, Shape & Sand

CS-1C1B1S

Price/ea
$43,990.00
Back

Features:

  • Designed for high production shaping and sanding of straight stock of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
  • Workpiece is through feed with rubber pad conveyor and spring-load pressure rolls at top, without sliding.
  • Extra slide side rolls extension table up to three feet for larger material supporting.
  • Sanding head can be adjusted forward & backward, up & down and tilt – 45 to + 90 degrees.
  • Variable sanding belt speeds 0 ~ 3600 RPM for the best finish result.
  • Automatic control jumping sanding head stroke design for not round over the front and end of material.
  • Variable feeding conveyor 10’ to 136’ to get different setup easily.
  • Sanding belt tension mechanism is self-balance designed, it maintains proper tension at all the time, that not only provides steady belt pressure but extends belt service life.
  • Constant sanding pressure is pneumatic cylinder controlled to achieve uniform and superior finish.
  • Air blower actives clean and cool down the sanding belt.
  • Industrial powerful shaper motor for best cutting capacity.
  • Shaper spindle can be adjusted up & down, in & out with 9000-RPM speed.
  • Extra sanding head can be used with profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.

Specification:

SPECIFICATIONS
Profile Platen Belt Head Wheel, Belt Head
Range of Workpiece Width 2" ~ 70" Brush Wheel Drive Motor 2 HP
Minimum Length of Workpiece 4" Brush Tilts +90° ~ 180°
Range of Workpiece Thickness 1/6" ~ 4" Sanding Belt 3" x 20"
Sanding Belt Width 1" ~ 4" Sanding Wheel Dia. Max 8"
Sanding Belt Length 98" Sanding Spindle Dia. 1"
Belt Tilts -45° ~ +90° Spindle Speed  0 ~ 3600 RPM
Belt Drive Motor HP Shaper Head  
Sanding Belt Speed 0 ~ 2400 FPM Shaper Motor 7-1/2 HP
Profile Head Stroke 0 ~ 3" Shaper Speed 6000/8000 RPM
Sanding Pressure 1 ~ 5 LBS Shaper Spindle Dia. 1-1/4"
     Shaper Spindle Length 6"
Max. Cutter Dia. 8"

Related Products