Working Capacity:
•Working width (with saw blade cutting circle 230-305mm) = 80-190mm
•Working height (with saw blade cutting circle 230-305mm) = 20-150mm

1st Right vertical slicing spindle
•Motor = 25HP
•Spindle diameter = 50mm c/w keyway and cooling device
•Spindle speed = 3500rpm/Min
•Tool cutting circle = 230-305mm
•Setting range axial = 50mm
•Table is adjustable to tool cutting circle.
•Cooling device of spindle.

2nd Left vertical slicing spindle
•Motor = 25HP
•Spindle diameter = 50mm c/w keyway and cooling device
•Spindle speed = 3500rpm/Min
•Tool cutting circle = 230-305mm
•Setting range axial = 50mm
•Table is adjustable to tool cutting circle.
•Cooling device on spindle

SPINDLE
•Precision spindles are mfg. of SCM-4 tool steel (imported from MISHIBISHI Japan), heat treated to HR 46° (ROCKWELL C Scale) and. 9,000rpm spindle are fitted with class 6 SKF match ball bearings per spindle then mated to precision machined spindle housings.
•Besides, the spindle body and whole bearing house (include the appearance and interior of the bearing house) has been burnished completely.
•So, the high hardness material, and high class SKF ball bearings, and precise spindle body and bearing house, finally by SHEN KO accurate combination technique. The spindle must achieve every user’s requirement.
•Spindle tolerance is guaranteed included to (0.002mm / 0.00007") accuracy.
•TRANSMIT BELT
•All spindles running are transmitted by V-shaped belt (MITSUBISHI) without slipping problem.

Feed system
•Motor = 5HP
•Feeding speed, infinitely variable by inverter = 6-36M/min
•Pneumatic pressure to feed system, 4 set upper feed roller provide powerful feeding.
•Both upper and bottom feed are driven by universal joint drive without chains prevent stock free, more robust, low maintenance, longer life and more accurate.
•Diameter of feed roller: 140mm
•Three set drive table roller
•Infeed drive table roller
•Infeed drive table roller
•Out feed table roller
•3 stage pressure setting of feed roller, pneumatic roller pressure compensates for large variance in work piece thickness, max. air pressure setting is 6 bar.

Table and fence
•Short infeed table, 1.2M long with 1 driven roller above on table, table harden and chromed.
•Hard-chromed table
•Harden fence.

Pressure element
•Pneumatic pressure plate assures stability during slicing.
•Precision splitting wedge guide for saw kerfs.
•Precision splitting wedge guide for saw kerfs.

Operation
•45 pcs mechanical digital read-out.
•Mobile jog panel box for setting up.
•Central lubricating for spindle
•Manual oil pump to remove the resin from table. Each table has 2 holes for lubrication. 
•Operating panel separate from control cabinet, easy to operate

Safety cover with lamp inside